AWE Tuning Audi 3.0T S-FLO Carbon Intake Kit | B8 | B8.5 S4 | S5 | 2660-13028

From the S-FLO filter alone to the carbon fiber S-FLO set up, there's an option for every taste and budget - and a simple upgrade path to easily go from entry to extreme:

• S-FLO allows 34% more airflow over stock
• Max gains of 15 hp and 11 ft-lbs of torque at the crank (3.0T)
• Max gains of 7 hp and 6 ft-lbs of torque at the crank (3.2L)
• 2x2 twill carbon fiber cover with UV-stabilized resin clear coat
• Perfect integration with OEM air inlet -- mounts in factory location for a sleek OEM look
• 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube
• Dry media, washable S-FLO Filter
• Designed, engineered, and tested in-house at AWE
• Perfect fitment, guaranteed

Power for every budget, and a simple upgrade path when you’re ready

The AWE S-FLO Intake Suite is available as the full kit with carbon cover, or piece-by-piece. Start with the S-FLO Filter, later upgrade to an S-FLO Intake (“filter on a stick”), then add the S-FLO Carbon Cover for the full experience. Or, go full S-FLO Carbon Intake from the jump. The decision is yours:

The S-FLO Carbon Intake:

For drivers looking for an intake that not only performs, but also looks going doing it, the AWE S-FLO Carbon Intake is the one. The S-FLO Carbon Intake is comprised of three primary components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube and (3) the 2x2 twill carbon fiber cover.

By deploying the fully enclosed S-FLO Carbon Intake, the ambient ram-air is drawn into the inlet and fed beneath the S-FLO’s carbon cover, keeping it cool compared to an open element configuration susceptible to engine bay temperatures. Keeping this ambient ram-air cool results in impressive power gains filtered through the AWE S-FLO Intake.

The AWE S-FLO Carbon Intake includes the S-FLO Carbon Cover, S-FLO Intake, S-FLO Filter, and all necessary brackets and mounting hardware.

The S-FLO Intake:

The AWE S-FLO Intake packs the same power as the full carbon intake, minus the carbon. The AWE S-FLO Intake is comprised of two key components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube. Together, it’s a free-flowing match made in heaven, allowing optimal flow geometry through the inlet, center section, and outlet of the tube, keeping things tight with our custom molded lip for a perfect seal to the airbox. The AWE S-FLO Intake includes the AWE S-FLO Intake hose, S-FLO Filter, and all required hardware for installation.

The S-FLO Filter:

The S-FLO Filter is the largest filter that can fit within the factory air-box, and also our bespoke filter of choice for all 3.0T / 3.2L S-FLO packages. The AWE S-FLO Filter is a proprietary, washable, dry media, large cylindrical filter that has been tested to allow up to 34% more airflow than the factory paper filter.

The AWE S-FLO Filter includes:

The entirety of the 3.0T/ 3.2L S-FLO lineup was designed and tested on AWE in-house vehicles, and are cost-effective, incredibly attractive upgrades to bring the power!

Please note: AWE S-FLO Intakes are for racing use only.

Install Instructions can be found here.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov