Front Rotor Set (340x30mm) - VW/Audi / MK7 / GTI / GLI / R / Tiguan / CC / Arteon / S3 / TT-S | 5QN615301A-ZIM-QTY2

The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing.

The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface.

Coat-Z Protective Coating - The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance.

Material quality / high carbon - Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Features and Benefits:

• Coat-Z protective anti-corrosion coating
• Better wet braking performance by permanent expulsion of brake dust and water
• Sporty look
• Because of the anti-corrosion protection Coat Z better finish - especially of the hub and the outer diameter
• Noticeable improvement in the braking power of your car
• Prevention of brake fade
• Countersinking of holes doubles up as wear indicator
• 1:1 exchange of original disc possible
• No additional adaption necessary
• Not subject to registration: general ABE certification supplied with disc

RUN IN NOTICE - The following run-in notices are recommended to ensure a safe and proper operation of the brake disc / brake pad system:

• Violent or shock-braking should be avoided during the first 300 km of travel after the change of the brake discs.
• Through a moderate run-in, a gradual warming of the brake disc is performed without creating a heat shock and the friction surfaces of brake disc and brake pad are aligned to each other.
• Perform at least 30 brake applications from a medium velocity (approx. 100 km/h) with a moderate deceleration (maximum braking time 3 seconds) down to a velocity of initially 50 km/h, and after about half of the braking cycles were performed down to 25 km/h. Hereby letting the brake disc cool down for approx. 3 min. between the brake cycles through the motion airflow.
  

OE Part #'s


5Q0-615-301-G / 5Q0615301 G / 5Q0 615 301 G / 5Q0615301G

3C0-615-301-C / 3C0615301 C / 3C0 615 301 C / 3C0615301C

1K0-615-301-AD / 1K0615301 AD / 1K0 615 301 AD / 1K0615301AD

5QN-615-301-A / 5QN615301 A / 5QN 615 301 A / 5QN615301A

3C0-615-301-D / 3C0615301 D / 3C0 615 301 D / 3C0615301D

8S0-615-301-D / 8S0615301 D / 8S0 615 301 D / 8S0615301D

8S0-615-301 / 8S0 615 301 / 8S0615301

Zimmerman Part #  

600324352

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov