Silver Trim Ring for New South Indigo Gauges | TRM001
- Share:
Select Your Car to Verify Fitment
Made from stamped steel and powdercoated to match the VW instrumentation trim.
Note: Will only fit New South Indigo gauges.
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This part fits the following vehicles
| Make | Model | Submodel | Engine | Drive |
|---|---|---|---|---|
| Audi | TT Mk1 (1998-2007) | 1.8T 180HP | FWD | |
| Audi | TT Mk1 (1998-2007) | 1.8T 180HP | Quattro | |
| Audi | TT Mk1 (1998-2007) | 1.8T 225HP | ||
| Audi | TT Mk1 (1998-2007) | 3.2L VR6 | ||
| Audi | TT Mk2 (2008-2015) | 2.0T FSI | FWD | |
| Audi | TT Mk2 (2008-2015) | 3.2L VR6 | ||
| Audi | TT Mk2 (2008-2015) | 2.0T TSI | FWD | |
| Audi | TT Mk2 (2008-2015) | 2.0T TSI | Quattro | |
| VW | Beetle (2012-2019) | 2.0T | ||
| VW | Mk4 (1999.5-2005) | 337/20th | 1.8T | |
| VW | Mk4 (1999.5-2005) | GTI | 1.8T | |
| VW | Mk4 (1999.5-2005) | Golf | 2.0L | |
| VW | Mk4 (1999.5-2005) | GTI | 12v VR6 | |
| VW | Mk4 (1999.5-2005) | GTI | 24v VR6 (2002+) | |
| VW | Mk4 (1999.5-2005) | Jetta | 12v VR6 | |
| VW | Mk4 (1999.5-2005) | Jetta | 1.8T | |
| VW | Mk4 (1999.5-2005) | Jetta | 2.0L | |
| VW | Mk4 (1999.5-2005) | Jetta | 24v VR6 (2002+) | |
| VW | Mk4 (1999.5-2005) | GLI | 1.8T | |
| VW | Mk4 Golf R32 (2004) | 3.2L VR6 | ||
| VW | Mk5 (2006-2009) | GTI | 2.0T FSI (2006-2008) | |
| VW | Mk5 (2006-2009) | GTI | 2.0T TSI (2008.5+) | |
| VW | Mk5 (2006-2010) | Jetta | 2.0T TSI (2008.5+) | |
| VW | Mk5 (2006-2010) | GLI | 2.0T FSI (2006-2008) | |
| VW | Mk5 (2006-2010) | GLI | 2.0T TSI (2008.5+) | |
| VW | Mk6 (2010-2014) | GTI | 2.0T | |
| VW | Mk6 (2011-2014) | GLI | 2.0T GLI (2012-2013) |
3.50
Based on 2 reviews
Sort
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Reviews With
Any Media
Images
Videos
Breakdown
0
1
1
0
0
Product Reviews
Company
Questions
Silver Trim Ring for New South Indigo Gauges
Cheap material, overpriced product.
Reply:
Thank you for taking the time to leave a review. The needle being off is normal as it needs to be calibrated. To do this you will need to get to the back of the gauge itself. You will come across a sticker that is covering the calibration window. Inside the gauge, you will see the calibration brass ring. You will need a small flat head screwdriver to move the brass ring inside the gauge either up or down to calibrate the needle. Please feel free to contact us if you have any other questions or concerns.
Was this review helpful?
4 years ago
Silver Trim Ring for New South Indigo Gauges
Fits but doesn’t sit flush nor can you sway the trim ring on the gauge
Was this review helpful?
4 years ago
New content loaded
