IE VW MK7 & Audi 8V DSG (DQ250) TCU Tune | IESOVX2

IE DSG TUNING VW & AUDI MQB DQ250 TRANSMISSION

Don't short shift your ECU tune and performance parts, get the most out of your modifications with the IE DSG Transmission tune for 2015+ Golf R, GTI, A3, & S3 2.0T. Instantly gain increased power, higher RPM limit, faster shifts, optimized shift points, adjustable launch control, and a true performance tuned transmission. Acceleration times will greatly improve transforming your 2.0T into a fully rounded performance monster. 

PRODUCT FEATURES:

• Required for high-output IE ECU tunes
• Lightning fast gear shifts
• Higher shift points of 7100 RPM
• Kick down in manual mode eliminated
• Lag time reduced when starting off in first gear
• Multiple launch RPMs: 3200, 3400, 3600, 3800, 4000
• Drive shift mapping entirely reworked with an enthusiast in mind
• Flashed directly through OBD-II Port (No TCU removal required)
• Increased clutch pressure on tap for higher torque without slip
• Temperature protection remains for safety
• Gear hunting reduced
• Gearbox “Torque Limiters” removed

IE DSG TUNING VW MK7/8V 2.0T (TSI) TRANSMISSION
The IE DSG Tune for the MQB 2015-2017 Golf R / S3 and 2015-2018 GTI / A3 is expertly calibrated to deliver the full performance potential from your existing ECU tune and modifications. This transmission file retunes the complicated DSG mapping and completely reworks the shift points in drive, sport, and manual shifting. This delivers much, much faster and stronger shifts taking time directly off the 0-60 and ¼ mile times making the car more reliable and fun to drive.

PERFECT FOR ALL ECU TUNE STAGES
IE’s TCU/DSG tune is all-inclusive and does not offer expensive upgrades. That’s right, there are no unnecessary upgrade charges and all features are included from the outset. A great deal of sportiness is added from the tune while maintaining factory smoothness and driveability. More aggressive launches and faster shifts are guaranteed to put a smile on your face. Also, expect acceleration and 0-60 times to improve from faster shifting.

SELECTABLE LAUNCH CONTROL RPM'S
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

Available Launch Control RPMs:

• 3200 RPM
• 3400 RPM
• 3600 RPM
• 3800 RPM
• 4000 RPM

IE POWERlink DIRECT PORT FLASH TOOL
IE's POWERlink direct port flash tool is required to flash your ECU (engine control unit) or TCU (transmission control unit) and is available separately. The POWERlink tool is sold with all new IE ECU tunes and can also be used to flash your new DSG tune. If you already own an IE POWERlink unit, purchasing this file will add the credits to your cable within one working day. If you do not own a POWERlink cable, please chose to add one in the drop-down menu above.

POWERlink FEATURES:

FILE SWITCHING
The PowerLink cable allows for map switching without making a trip back to an IE Software dealer. This allows you to test different TCU maps and features such as launch points.

EASY OPERATION
Simply plug your IE PowerLink cable into your vehicle’s OBD-II port and the USB port on your Windows-powered laptop to use the included IE Flash Wizard software. The flash wizard will then walk you through the installation steps.

FLASH MULTIPLE CARS
Have a friend with a compatible VW or Audi? Share the power with up to 5 different cars with a single cable. Just add enough credits to your cable for the desired tune and power-up your entire crew.

RETURN TO STOCK ANYTIME
With the IE PowerLink, you can return your vehicle back to original ECU or TCU programming at any time.

EASY UPDATES
IE will always provide free software updates as they become available and easily reflashed through your IE PowerLink cable.

SYSTEM REQUIREMENTS
Laptop or tablet with Wifi connection and USB port running Windows 7 or newer operating system required. Powered by 32 or 64-bit processor with 1.0GHz or greater and 4GB of Ram. Windows NT not supported.

IE DSG TUNE TECHNICAL FEATURES

HIGHER SHIFT POINTS
Utilize the whole powerband of your turbocharged GOlf R or S3 engine without the DSG interfering and shifting early.

DRIVE MAPPING REWORKED
The MQB 2.0 TSI DSG is designed to a fault to keep engine rpm extremely low in drive. We completely reworked this, creating a more enthusiast-friendly drive mapping which shifts a bit higher. This eliminates vibration and that constant feeling that you’re lugging the engine. We’ve reworked the downshifting aspect as well, making the transmission much quicker to deliver power when you need it. Thousands of miles of testing were accumulated and a variety of users were polled to come up with this improved drive mode.

INCREASED CLUTCH PRESSURE
Increasing the clutch pressure allows for the transmission to hold more torque without causing clutch damage or expedited wear. With the increased torque, the acceleration will be greatly increased and launches will far more aggressive.

FLASHED THROUGH OBD-II PORT
There’s no need to remove the TCU from the car and it can be flashed in your driveway or through an IE software dealer. Additionally, having an IE PowerLink cables means you can install updates are they become available as well as read TCU and ECU fault codes.

TAKE-OFF LAG REDUCED
The clutch engagement has been reworked to reduce that annoying “DSG Lag” when moving away from a stop.

MULTIPLE LAUNCH RPMS
The purchase of an IE DSG file grants you access to customization of launch points. With several launch points to choose from you can pick what works best for your setup!

KICKDOWN REMOVED IN TIPTRONIC/MANUAL MODE
The kickdown switch is disabled in manual shift mode, ensuring you stay in the gear you’ve selected, even during hard launches or over bumpy terrain.

FLAWLESS OPERATION WITH IE ECU TUNES
The IE DSG Tune and ECU Tune were developed side by side on our in-house dynamometer. By running both tunes you will unlock the full potential of your 2.0 TSI Gen 3 engine and transmission.

Fitment:

• VW - Golf R 2015-2017 (MK7/MK7.5) W/DSG TRANSMISSION
• VW - GTI 2015-2018 (MK7/MK7.5) W/DSG TRANSMISSION
• AUDI - S3 2015-2017 (8V) W/ DSG TRANSMISSION
• AUDI - A3 2015-2018 (8V) W/ DSG TRANSMISSION
• *IE DSG tunes are available only for vehicles equipped with 6 speed DSG (DQ250) transmissions. Does not function with manual 6-speed transmission cars.
• If you have a 2018+ Golf R/S3 or 2018+ GTI/A3 your vehicle requires the new MQB DQ381 Transmission Tune - AVAILABLE HERE.

 

About Integrated Engineering: Merging decades of experience with hundreds of hours of prototyping, engineering, dyno testing and daily usage evaluation has output exhaust systems that are the ultimate compliment to your performance car. IE products are proudly engineered, designed, and manufactured in-house, in Salt Lake City USA.

---

POWERlink Mobile

---

Add power to your Audi or VW and experience the game-changing freedom of mobile flashing. The IE POWERlink cable and app connect to your Apple or Android phone, giving you the power to tune your car, change octanes, upgrade stages, perform diagnostics, monitor live gauge data, and more. All from the palm of your hand! Add power anytime, anywhere -no laptop, no cord, no hassle.

Existing IE POWERlink V4 cable owners will require a free firmware update to enable Bluetooth connectivity. Simply plug in your cable to your Windows 10+ device and launch our Flash Wizard software to auto-update your cable.

Note: POWERlink Mobile requires an IE POWERlink cable, and the necessary credits required to tune your car. For further questions, contact sales@urotuning.com.

 

 

Download the app today! Available on both Apple and Android. 

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov