Mk4 Golf | Jetta SPC Rear TOE Shim - Priced EACH | 71520
- Share:
![email]()
![Facebook]()
![Twitter]()
![Pinterest]()
Select Your Car to Verify Fitment
With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to +/- 1.0 camber change and up to +.50 degree toe change. Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit.
TOE
Part No. / Change
71520 / +/- .13 degree
71521 / +/- .25 degree
71522 / +/- .38 degree
71523 / +/- .50 degree
Recommended Tools: 87530 - VW Shim Wrench
Rear Adjustment range: Toe +/- .13 degree to +/- .50 degree
Installation time: .5 hr/side
TOE
Part No. / Change
71520 / +/- .13 degree
71521 / +/- .25 degree
71522 / +/- .38 degree
71523 / +/- .50 degree
Recommended Tools: 87530 - VW Shim Wrench
Rear Adjustment range: Toe +/- .13 degree to +/- .50 degree
Installation time: .5 hr/side
Required: 1 shim per wheel/ per angle changed (Order qty 2 for both wheels)
NOTE: When installing these shims it is recommended that you use our VW Shim Wrench (P/N 87530) to assist in removing the rear hub.
CAUTION: Check brake & rotor clearance for binding. 75970 spacers maybe required.
⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
