MMX Brake Discs/Rotors - Front: BMW F2x / F3x Performance Fast Road | MMR30-0501F

MMX’s Performance Front Discs/Rotors make the perfect upgrade to your BMW F2x or F3x’s braking capability. Supplied as a pair of high quality, direct replacement 340mm x 30mm front discs that are a simple swap for your M-Sport factory originals, with matching rear discs also available. Manufactured with the trademark MMX directional groove design and a black zinc anti-corrosion coating, these rotors will not only perform brilliantly in fast road and track use, but also look great under your alloys.

The MMX Performance Front Discs/Rotors make the perfect upgrade to your BMW F2x or F3x M-Sport brakes (blue caliper) factory braking hardware. The 340mm x 30mm discs use the MMX directional groove design across the face for improved bite and debris clearance, plus helps to reduce distortion vibration during high temperature track day use.

In road use, these MMX directional grooves also generate less noise than straight or curved groove discs do, and don't suffer the fatigue cracking that drilled discs all too often experience after multiple heat cycles.

The two-piece disc (rotor) itself is made from high cast carbon - a mixture of high quality steel combined with carbon, giving a far higher friction coefficient compared to normal steel rotors. This is mounted via pin drive to an aluminium centre bell/hat.

To protect your discs and keep them looking great for years, a zinc high temperature coating in black is used for the centre bell and outer lip to provide thermal protection and ensure corrosion resistance for many years. Get rid of those corroded factory hubs forever more!

To really get the most out of these MMX Performance Discs, we recommend that they are combined with MMX’s RP650 Fast Road brake pads. All of our development has focussed on offering a combination of disc surface and pad compound that are perfectly matched to each other for fast road and trackday use. Naturally, the discs are also compatible with stock brake pads, and other brand fast-road pads too.

A matching pair of rear Performance Discs/Rotors are also available (MMX30-0501R); ideally we’d recommend fitting front and rear disc sets at the same time.

SPECIFICATION SUMMARY:

• Perfect for fast road & trackday use
  
• High carbon brake rotor
• Pin drive aluminium bell / hat
• Zinc anti-corrosion coating on centre bell and outer lip
• Public highway legal – R90 Approved
  
• Quiet and smooth braking with MMX directional groove design

FITMENT INFO:

Fitment is simple: these are a direct replacement for the M-Performance (blue caliper) factory vented front 340mm x 30mm size discs/rotors. Simply remove old ones and replace with these.

We’d always strongly advise replacing brake pads when new discs are fitted.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov