Powerflex Front Control Arm Inner Bushing (Front) - Mk2/3/4 VW | MK1 Audi TT | PFF85-201

PFF85-201 is for earlier cars with arms marked 8N0407151/152. On the front wishbones the later cars have a larger 45mm bush, in this case please use PFF3-501x2.

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension which improves handling, driver feedback, and tire wear. Powerflex uses their own premium polyurethane formulation to provide minimal NVH (noise, vibration, harshness) and increased longevity over stock rubber bushings.

Bushings are produced in one of three durometers – Yellow (70A, approximately 25% stiffer than stock), Purple (80A, approximately 30% stiffer than stock), and Black (95A, approximately 80% stiffer than stock). Unlike other brands using only one urethane grade for all applications, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each location while minimizing unwanted NVH.

Powerflex urethane hardness is standardized per fitment and location. This takes out the guess work, so when you choose Street, you know our design engineers have selected the optimal polyurethane hardness for your specific application. Select parts are also available in an optional stiffer urethane (Black Series) for track and autocross performance where NVH is less important.

⚠️CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov